RDL Press Room

<< FIRST < PREV

Page 1 of 13

NEXT > LAST >>

RDL Introduces RU-ADA4D 2x4 or 1x8 Audio Distribution Amplifier

2012-01-28

RDL is pleased to introduce the new RU-ADA4D 2x4 or 1x8 Audio Distribution Amplifier. The RU-ADA4D replaces the popular RU-DA4D Audio Distribution Amplifier and offers significant enhancements over its predecessor. The RU-ADA4D is produced in a durable, all-metal, 1/3 rack width MAX RACK-UP enclosure and wiring connections are now made on detachable terminal blocks rather than screw terminals. Other improvements include redesigned front and rear panel graphics, separate input and output level trimmers, dual-LED VU metering, switch-selectable stereo/mono mode and exceptional low-noise and common-mode rejection performance that lead the industry. The RU-ADA4D maintains the tradition of excellent headroom, very low distortion, exceptional crosstalk isolation and wide flat frequency response. It provides exceptional audio performance for the most critical applications in a professional audio environment.

Click here for complete story...

RDL Introduces RU-ADA8D 2x8 or 1x16 Audio Distribution Amplifier

2012-01-28

RDL is pleased to introduce the new RU-ADA8D 2x8 or 1x16 Audio Distribution Amplifier. The RU-ADA8D is designed in the durable, all-metal, 1/3 rack width MAX RACK-UP enclosure. The compact design allows for very high density audio distribution. Three RUADA8D units may be mounted in available RDL rack adapters to provide up to 48 channels of audio distribution in a single RU. The RU-ADA8D features separate input and output trimmers and dual-LED VU metering with exceptional headroom, very low distortion, excellent crosstalk isolation, wide flat frequency response and industry-leading low noise performance and common-mode signal rejection. It provides exceptional audio performance for the most critical applications in a professional audio environment.

Click here for complete story...

RDL Introduces FP-MR2 Message Repeater

2012-01-27

RDL is pleased to introduce the FP-MR2 Message Repeater. The FP-MR2 replaces the popular FP-MR1 message repeater and provides a number of enhancements. The FP-MR2 now records up to 1.7 minutes (1 min. 40 sec.) of audio, up from the 1 minute of recording time available in the FP-MR1. Both the frequency response and the noise floor have been dramatically improved making the FP-MR2 suited to recording and playing messages that include music content. The FP-MR1 was intended for voice-band applications.

Click here for complete story...

RDL Introduces RU-AFC2 Stereo Audio Format Converter

2011-11-21

November 21, 2011 - RDL is excited to announce that the new RU-AFC2 Stereo Audio Format Converter is now shipping. The RU-AFC2 replaces the popular RU-LA2D Stereo Audio Format Converter. The new RU-AFC2 is a bi-directional, balanced to unbalanced and unbalanced to balanced converter in the popular 1/3 rack width MAX RACK-UP enclosure. The RU-AFC2 includes all of the same features of its predecessor, but improves upon the RU-LA2D by offering dual-led VU metering on each channel, mono sum output and unparalleled audio performance. The RU-AFC2 is engineered for use in broadcast and studio applications, or anywhere a high-quality audio interface is required. The RU-AFC2 features exceptional audio fidelity, low noise (< ?100 dB, below ?10 dBV), low distortion (< 0.001%) and excellent crosstalk (< ?90 dB, 10 Hz to 20 kHz).

Click here for complete story...

RDL Introduces Wall Mount Brackets for HD Series Amplifiers

2011-11-21

November 21, 2011 - RDL is excited to announce that two new mounting brackets for the popular HD Series Amplifiers are now shipping. The HD-WM1 and HD-WM2 are wall mount brackets that mount an HD Series audio power amplifier and its power supply to a wall or other flat surface. The brackets are constructed of steel with a durable black powder coat finish. The interior of the brackets hold the power supply with space to conceal excess wire length for a professional installation. Special tabs are provided to firmly secure the wiring connected to the HD product. The included security cover slides easily into place to protect the HD product rear-panel connections and adjustments.

Click here for complete story...

<< FIRST < PREV

Page 1 of 13

NEXT > LAST >>

Copyright © 2012 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: May 26 2009